top of page
  • Writer's pictureMatt Spicer

Yamaha R7 Adjustable Triple Clamps Exploded Assembly

This document has been prepared to guide you through the assembly of the Robem Triple Clamps for the Yamaha R7 but is intended only as a supplemental diagram to the assembly instructions offered by your motorcycles manufacturer.

Robem Engineering triple clamps work with OEM bearings and require removal from your factory stem. Installation and assembly would be the same as the replacement of the lower steering-head bearings inner race.

Fasteners come pre-lubricated with molykote fastener lubricant.

Download PDF • 275KB

224 views0 comments


bottom of page