Matt Spicer
Aprilia RS 660 Superbike Lifter install
Installation of the #ApriliaRS660 superbike lifters Needed tools: Robem Engineering Superbike Lifters 13/64 Drill Bit (~5mm) M6x1 Tap Loctite 243 Included Hardware: (2) M6 x 16 Flange Head Button Heads (2) M6 X 20 Socket Head Cap Screws Starting with the left side of the bike install the left side lifter into bobbin mount using the supplied m6 truss flanged fastener to mark the underside of the swingarm. Mark the center of the second mounting location on the underside of the